Decreasing Solid Aerosols from Small Heat Sources Using the Optimized Electrostatic Precipitator

Abstract

Air quality and air pollution are important issues, and thus it is necessary to look at possibilities for how to decrease emissions in the atmosphere affordably and effectively. This article focuses on solid aerosols, specifically particulate matter, and the design of a low-cost solution for their decrease in the atmosphere. The mass concentration of particulate matter with the proposed optimized electrostatic precipitator was measured and compared with measurement without its implementation. Based on the results, it can be concluded that the designed ESP type could catch approximately 71% of solid particles. However, the real ability to capture particulate matter could be expected to be approximately 50–60% due to possible clogging, irregular cleaning and maintenance under normal conditions. Further, the article deals with the application of the village model with this type of electrostatic precipitator in households. Based on this model, the production of particulate matter would be reduced from 12.24 t/year to 6.12 t/year considering 50% separation efficiency and to 5.25 t/year considering 60% separation efficiency by the application to all heat sources for burning solid fuels for all emission classes. However, the reduction in particulate matter would be lower in real conditions.

Keywords

• particulate matter
• electrostatic precipitator
• reducing emissions
• solid aerosols