A Comparative Study of Microstructural Characteristics and Mechanical Properties of High-Strength Low-Alloy Steel Fabricated by Wire-Fed Laser Versus Wire Arc Additive Manufacturing

Abstract

This study evaluates the feasibility of producing high-strength low-alloy (HSLA) steel using advanced wire-fed laser additive manufacturing (LAM-W) and wire arc additive manufacturing (WAAM) technologies. Optimized parameters were independently developed for each heat source, utilizing a self-designed HSLA steel wire as the feedstock. Microstructural features and mechanical properties of the fabricated steels were characterized and compared, taking into account differences in heat input and cooling rates. LAM-W samples exhibited a finer columnar grain microstructure, while both LAM-W- and WAAM-produced steels predominantly showed lower bainite and granular bainite microstructures. LAM-W demonstrated higher strength and hardness, lower ductility, and comparable low-temperature toughness compared to WAAM. Both processes demonstrated an excellent balance between strength and ductility, with absorbed energy exceeding 100 J at −40 °C. The study confirms the feasibility of producing high-strength and tough HSLA steel parts using LAM-W and WAAM technologies, and compares the advantages and disadvantages of each method. These findings assist in selecting the most suitable wire-fed AM process for HSLA steel fabrication at high deposition rates.

Keywords

• wire-fed laser additive manufacturing (LAM-W)
• wire arc additive manufacturing (WAAM)
• high-strength low-alloy (HSLA) steel
• microstructure
• mechanical properties