Applied Sciences (Mar 2024)
A Study on the Dynamic Response of a Timber-Frame Beam–Bamboo Anchor-Supported Roadbed Slope under Train Load
Abstract
In order to investigate the dynamic response of embankment slopes supported by wooden frame beams and bamboo anchor rods under train loading, this study conducted model tests on embankment slopes supported by wooden frame beams and bamboo anchor rods and carried out three-dimensional numerical simulations of the slopes. This study focused on analyzing the effects of train loading frequency, the peak value difference, and the peak value of the soil pressure on the embankment slopes. This study also analyzed the horizontal displacement of the slope surface, the internal forces in the support structure, and the slope safety factor. The results indicated the following: (1) The increase in loading frequency from 2 Hz to 3 Hz resulted in a significant increase in dynamic soil pressure, with a smaller increase observed upon further frequency increments. Moreover, increasing the load or peak value difference led to an overall increase in the maximum dynamic soil pressure. (2) Under various loading conditions, the axial force in the top anchor rod was significantly greater than that in the middle anchor rod. Additionally, the axial force in the rod body exhibited a pattern of larger forces near the anchorage end and smaller forces near the anchor head. The location of the maximum bending moment in the anchor rod transitioned from the anchor head to the anchorage end as the slope depth increased. The bending moment of the anchor rod increased with the loading frequency but decreased with an increase in the peak value, showing a minor influence from the upper and lower peak values. (3) With the presence of this support system, the slope safety factor increased by 20.13%. A noticeable reduction in the horizontal displacement of the slope surface was observed, with the greatest reduction in the top slope area, followed by the slope angle.
Keywords
