Journal of Rock Mechanics and Geotechnical Engineering (Feb 2019)

Assessment of strain bursting in deep tunnelling by using the finite-discrete element method

  • Ioannis Vazaios,
  • Mark S. Diederichs,
  • Nicholas Vlachopoulos

Journal volume & issue
Vol. 11, no. 1
pp. 12 – 37

Abstract

Read online

Rockbursting in deep tunnelling is a complex phenomenon posing significant challenges both at the design and construction stages of an underground excavation within hard rock masses and under high in situ stresses. While local experience, field monitoring, and informed data-rich analysis are some of the tools commonly used to manage the hazards and the associated risks, advanced numerical techniques based on discontinuum modelling have also shown potential in assisting in the assessment of rockbursting. In this study, the hybrid finite-discrete element method (FDEM) is employed to investigate the failure and fracturing processes, and the mechanisms of energy storage and rapid release resulting in bursting, as well as to assess its utility as part of the design process of underground excavations. Following the calibration of the numerical model to simulate a deep excavation in a hard, massive rock mass, discrete fracture network (DFN) geometries are integrated into the model in order to examine the impact of rock structure on rockbursting under high in situ stresses. The obtained analysis results not only highlight the importance of explicitly simulating pre-existing joints within the model, as they affect the mobilised failure mechanisms and the intensity of strain bursting phenomena, but also show how the employed joint network geometry, the field stress conditions, and their interaction influence the extent and depth of the excavation induced damage. Furthermore, a rigorous analysis of the mass and velocity of the ejected rock blocks and comparison of the obtained data with well-established semi-empirical approaches demonstrate the potential of the method to provide realistic estimates of the kinetic energy released during bursting for determining the energy support demand. Keywords: Rockburst, Finite-discrete element method (FDEM), Deep tunnelling, Hard rock excavations, Brittle fracturing, Discrete fracture network (DFN)