Influence of Surroundings on Radiant Tube Lifetime in Indirect-Fired Vertical Strip Annealing Furnaces

Abstract

The effects of surrounding radiation—emanating from radiation exchange with neighboring partners in indirect-fired vertical strip annealing furnaces, such as the other radiant tubes, the passing strip, and the enclosing furnace chamber—on the radiant tube lifetime were studied. In-house developed and validated numerical models were used to calculate the thermomechanical behavior, especially creep deformations and the corresponding stresses as lifetime indicating parameters. Different setups of recirculating P-type radiant tubes were investigated, including a reference case of an isolated tube. The investigations could be broadly classified into the study of the effects of different tube arrangements, burner operations (synchronous/asynchronous on/off firing), and changes of strip parameters (width/temperature). Results showed higher creep deformation of the central radiant tube in the setup with three tubes arranged horizontally in a row compared to three tubes stacked in a vertical column, even though the respective characteristic temperature values in a firing cycle were similar. Furthermore, the cases with asynchronous burner firing resulted in lower creep rates than other cases, where the burners were operating in synchronous on/off firing modes. In addition, the change of strip width had a higher impact on radiant tube lifetime compared to locally changing strip temperatures across the furnace. Alternating temperatures, caused by burner operation or process changes, such as change of strip’s speed or cross-section, and local temperature gradients were observed to be the main factors influencing the tube’s service life.

Keywords

• radiant tube lifetime
• metallic radiant tube
• annealing furnace
• industrial furnace
• thermomechanical stress
• creep
• radiation
• galvanizing line
• cgl