International Journal of Thermofluids (Aug 2023)

Swirling jet impingements for thermal management of high concentrator solar cells using nanofluids

  • Sajih Bin Suja,
  • Md.Rhyhanul Islam,
  • Zahir U. Ahmed

Journal volume & issue
Vol. 19
p. 100387

Abstract

Read online

Large intensity of irradiance in high concentrator solar cells leads to extremely high temperatures causing an adverse effect on the performance of solar cells. Efficient cooling systems are crucial for the optimal performance of high concentrator cells, which are typically required to operate within a prescribed temperature range (⁓ 110 °C). The implementation of effective cooling strategies poses a significant challenge for High Concentrator Photovoltaic Thermal (HCPV/T) hybrid systems to ensure sustained performance and longevity of the modules. This study proposes a novel method for the thermal management of High Concentrator Solar Cells (HCSC) using swirling nanofluid jets impinging on a heat sink. The study applies RANS (Reynolds-Averaged Navier-Stokes) method with the SST k-ω turbulence model and energy equation to resolve a conjugate heat transfer analysis for three different flow ratios: Qr = 0, Qr = 0.5 and Qr = 1 and two water-based nanofluids: Al2O3-Water and CuO-Water. The numerical results demonstrate a significant decrease in cell temperatures, reaching as low as 71 °C. At a mass flow rate of 50 g/min, the use of Al2O3-Water nanofluid increases the overall electrical efficiency by a maximum of 39.43%. In contrast, a minimum electrical efficiency of 39% for CuO-Water nanofluid is obtained for a lower mass flow rate (25 g/min). Al2O3-Water nanofluid yielded a maximum PEC (Performance Evaluation Criteria) of 116%, while CuO-Water nanofluid yielded about 113%. In addition, an increase of the mass flow rate results in an improvement of temperature uniformity, as demonstrated by a reduction of temperature variation from 6.8 to 5.2. These results suggest that the use of nanofluids is promising. The proposed swirling jet impinging on a heat sink in combination with nanofluid provides an effective cooling technique for HCSC, thereby potentially contributing to the improvement of the cell's performance and longevity.

Keywords