Comparison of Aerial and Ground 3D Point Clouds for Canopy Size Assessment in Precision Viticulture

Abstract

In precision viticulture, the intra-field spatial variability characterization is a crucial step to efficiently use natural resources by lowering the environmental impact. In recent years, technologies such as Unmanned Aerial Vehicles (UAVs), Mobile Laser Scanners (MLS), multispectral sensors, Mobile Apps (MA) and Structure from Motion (SfM) techniques enabled the possibility to characterize this variability with low efforts. The study aims to evaluate, compare and cross-validate the potentiality and the limits of several tools (UAV, MA, MLS) to assess the vine canopy size parameters (thickness, height, volume) by processing 3D point clouds. Three trials were carried out to test the different tools in a vineyard located in the Chianti Classico area (Tuscany, Italy). Each test was made of a UAV flight, an MLS scanning over the vineyard and a MA acquisition over 48 geo-referenced vines. The Leaf Area Index (LAI) were also assessed and taken as reference value. The results showed that the analyzed tools were able to correctly discriminate between zones with different canopy size characteristics. In particular, the R2 between the canopy volumes acquired with the different tools was higher than 0.7, being the highest value of R2 = 0.78 with a RMSE = 0.057 m3 for the UAV vs. MLS comparison. The highest correlations were found between the height data, being the highest value of R2 = 0.86 with a RMSE = 0.105 m for the MA vs. MLS comparison. For the thickness data, the correlations were weaker, being the lowest value of R2 = 0.48 with a RMSE = 0.052 m for the UAV vs. MLS comparison. The correlation between the LAI and the canopy volumes was moderately strong for all the tools with the highest value of R2 = 0.74 for the LAI vs. V_MLS data and the lowest value of R2 = 0.69 for the LAI vs. V_UAV data.

Keywords

• precision farming
• vegetation index
• remote sensing
• sensor
• vineyard
• spatial variability