Bioengineering (May 2024)
Failure Diagnosis for Dental Air Turbine Handpiece with Payload Using Feature Engineering and Temporal Convolution Network
Abstract
The internal mechanisms of dental air turbine handpieces (DATHs) have become increasingly intricate over time. To enhance the operational reliability of dental procedures and guarantee patient safety, this study formulated temporal convolution network (TCN) prediction models with the functions of causality in time sequence, transmitting memory, learning, storing, and fast convergence for monitoring the health and diagnosing the rotor and collet failure of DATHs. A handpiece mimicking a dentist’s hand load of 100 g was employed to repeatedly mill a glass porcelain block back and forth for cutting. An accelerometer was employed to capture vibration signals during free-running of unrestrained operation of the handpiece, aiming to discern the characteristic features of these vibrations. These data were then utilized to create a diagnostic health classification (DHC) for further developing a TCN, a 1D convolutional neural network (CNN), and long short-term memory (LSTM) prediction models. The three frameworks were used and compared for machine learning to establish DHC prediction models for the DATH. The experimental results indicate that, in terms of DHC predicted for the experimental dataset, the square categorical cross-entropy loss function error of the TCN framework was generally lower than that of the 1D CNN, which did not have a memory framework or the drawback of the vanishing gradient problem. In addition, the TCN framework outperformed the LSTM model, which required a longer history to provide sufficient diagnostic ability. Still, high accuracies were achieved both in the direction of feed-drive milling and in the gravity of the handpiece through vibration signals. In general, the failure classification prediction model could accurately predict the health and failure mode of the dental handpiece before the use of the DATH when an embedded sensor was available. Therefore, this model could prove to be a beneficial tool for predicting the deterioration patterns of real dental handpieces in their remaining useful life.
Keywords
