Preparation and Characterization of Plasters with Photodegradative Action

Abstract

The aim of this project is to investigate the behaviour of several special types plasters specifically designed to degrade the most common pollutants which are present in the atmosphere. In particular, specific additives have been added to these plasters, in order to obtain a broad spectrum of active and synergic response, each of which have peculiar functions: - microporous materials, such as clinoptilolite, a natural zeolite, that promotes the adsorption of air pollutants thanks to its porous nature; - nano-fillers, such as carbon nanotubes, that behave both as reinforcing agents as well as adsorbent materials; - photochemical agents, such as titanium oxide, that degrade air pollutants, previously adsorbed on carbon nanotubes and zeolites, thanks to the action of light that activates photodegradation reactions. All the samples were also characterized in terms of mechanical properties, adhesion to supports and water absorption. Furthermore, photodegradation tests were carried out by exposing plaster surfaces, wetted with a Rodamine solution, to Ultraviolet rays (UV) for different times. Plasters photodegradative capacity was evaluated and the results highlighted the fact that the designed admixtures showed an important photodegradative action, strictly dependent on the types and specific ratios of the selected additives.

Keywords

• photodegradative action
• plaster
• carbon nanotubes
• clinoptilolite
• titanium oxide
• zeolite