Study on the influence of elastic modulus heterogeneity on in-situ stress and its damage to gas shale reservoirs

Abstract

Shale heterogeneity has a significant effect on drilling and completions, hydraulic fracturing, as well as hydrocarbon development performance. However, it lacks representation of rock damage/failure caused by the mechanical heterogeneity and “stress shadow” effect during the hydraulic fracturing process. In this paper, the Galerkin finite element method was adopted to numerically simulate the hydro-mechanical coupled interaction based on the solver in the COMSOL Multiphysics software and Matlab scripting development. The Weibull probability density function was used to represent the mechanical heterogeneity of gas shale. Under the condition of fully fluid-solid coupling during the fracking process, the effect of mechanical heterogeneity on von – Mises stress, strain energy density, damage factor, and fluid pressure was numerically simulated in the gas shale wells. The curves of von – Mises stress, strain energy density, and damage factor along a certain straight line showed the obvious decreasing distribution in a completely homogeneous formation. As the strata are heterogeneously enhanced, their distribution curves showed fluctuations. Moreover, von – Mises stress and strain energy density had a good relationship with damage factors. Accordingly, the method of rock damage/fracture and ''stress shadow'' effect caused by mechanic heterogeneity was put forward under the circumstance of two–dimensional plane strain. That was to use, the von – Mises stress or strain energy density at the single point or line to characterize the degree of local rupture or the shadow effect of stress, and the average strain energy density per unit area to characterize the degree of rupture of the rock or the intensity of the shadow effect. The study is of great significance to further improve the SRV(Stimulated Reservoir Volume) fracturing design and the productivity of gas shale wells.