Computational Fluid Dynamics Modeling of Ammonia Concentration in a Commercial Broiler Building

Abstract

In the present study, a numerical model was developed to predict the flow pattern inside a broiler building. The model was intended to predict the velocity fields inside the domain and the ammonia (NH3) emitted or released by litter from poultry housing. The numerical model was developed in computational fluid dynamics (CFDs) commercial code and intended to represent a commercial broiler building and to simulate the 3D and heat transfer in steady-state flow. The evaporative cooling pads were also included in the model. The validation of the model was based on experimental measurements obtained in previous studies. The simulations were focused on the summer, winter, and mid-season conditions. Numerical measurements of NH3 concentration were compared with the experimental measurements, and a quite good agreement was verified. The numerical results allowed the characterization of: the inside flow pattern developed for the summer and winter periods and the NH3 and velocity field distributions inside the broiler building. It was found that NH3 concentration increased along the tunnel, as a result, especially, of the low flow rate of the exhaust fan. It was verified that the low velocities inside domain were not sufficient to remove the gaseous pollutants.

Keywords

• ammonia emission
• broiler building
• CFD
• measurement techniques
• outside climate