Degradation of the mixture of the ketoprofen, meloxicam and tenoxicam drugs using TiO2/metal photocatalysers supported in polystyrene packaging waste

Abstract

The solution mixture of the non-steroidal anti-inflammatory drugs ketoprofen, meloxicam and tenoxicam was degraded through systems, composed of different photocatalysts based on TiO2 (Fe and Cu) and the hydrogen peroxide oxidant. The monitoring was performed by UV-Vis spectroscopy. Under sunlight radiation, a reduction in peaks was observed with the use of impregnated photocatalysts. After 60 min, the sun/H2O2/Fe-TiO2 system reached degradations of 46.5% and 93.2% at 260 and 367 nm, respectively, and was selected for further studies. The degradation kinetic reached 92 and 96% of degradation after 180 min, for the λ of 260 and 367 nm, respectively. The kinetic curve could be represented by the empirical model proposed by Nichela and co-authors, indicating that besides the heterogeneous photocatalysis that occurs at the surface of the TiO2 there is also the joint effect of the photo-Fenton process. After the treatment, there was no toxicity to cress and lettuce seeds. However, a sensitivity of the thyme seeds to the compounds formed during the treatment was verified. After the fifth treatment cycle, the supported photocatalyst showed degradation higher than 82%. These results indicate that this system is suitable for the treatment of effluents containing pharmaceutical compounds.

Keywords

• heterogeneous photocatalysis
• ketoprofen
• meloxicam
• tenoxicam