Experimental Research on Microstructure and Physical-Mechanical Properties of Expansive Soil Stabilized with Fly Ash, Sand, and Basalt Fiber

Abstract

Expansive soil is a source of risk to the foundations or subgrade engineering. Stabilization of expansive soil is imperative for practical engineering. A series of laboratory experiments were performed to analyze the physical-mechanical properties and microstructures of stabilized soil. Three stabilizers used in this study are fly ash, sand, and basalt fiber. Different percentages of fly ash (0, 5, 10, 15, and 20%), sand (0, 8, 16, and 24%), and basalt fiber (0 and 0.4%) were added by weight into natural soil. Experimental results indicate that the optimum moisture content of stabilized soil increases with the increase of fly ash content for a given sand content, whereas the maximum dry density shows a decreasing trend. The variation trend of optimum moisture content and maximum dry density turns reverse with the increase of sand content for a given fly ash content. Plasticity index is decreased by both increasing fly ash content and sand content. It is found that the maximum unconfined compressive strength and optimum growth rate of strength are obtained by selected mixtures of 10% fly ash, 8% sand, and 0.4% basalt fiber contents. As the analysis of complementary effect suggests, most of the mixt treatments applied in this study have produced good results associated with the strength enhancement of expansive soil. In line with the results of SEM tests, the connection among clay particles has been enhanced through the generation of hydration products (C-S-H and AFt) of fly ash. The filling effect of sand has increased the integrality and compactness of stabilized soil. Moreover, the gripping effect between fibers and soil particles notably improves the strength of stabilized soil. The effect of sand on reinforced soil with 0.4% basalt fiber increases the interfacial force between fibers and soil particles.