Macro- and Micromechanical Assessment of the Influence of Non-Plastic Fines and Stress Anisotropy on the Dynamic Shear Modulus of Binary Mixtures

Abstract

Resonant column tests were carried out on Hostun sand mixed with 5%, 10% and 20% non-plastic fines (defined as grains smaller than 0.075 mm) in order to quantify the combined influence of the void ratio (e), anisotropic stress state (defined as σv′/σh′) and fines content (fc) on the maximum small-strain shear modulus Gmax. A significant reduction in the Gmax with increasing fc was observed. Using the empirical model forwarded by Roesler, the influence of e and σv′/σh′ on Gmax was captured, although the model was unable to capture the influence of varying fines content using a single equation. From the micro-CT images, a qualitative observation of the initial skeletal structure of the ‘fines-in-sand’ grains was performed and the equivalent granular void ratio e* was determined. The e was henceforth replaced by e* in Roesler’s equation in order to capture the variation in fc. The new modification was quantified in terms of the mean square error R2. Furthermore, the Gmax of Hostun sand–fine mixtures was predicted with good accuracy by replacing e with e*. Additionally, a micromechanical interpretation based on the experimental observation was developed.

Keywords

• anisotropic stress
• Hostun sand
• resonant column
• maximum shear modulus
• fines content
• void ratio