Magnetic supported activated carbon obtained from walnut shells for bisphenol-a uptake from aqueous solution

Abstract

Abstract This work investigated the usability of activated carbon walnut shell (ACWS) and magnetic activated carbon walnut shell (MACWS) for Bisphenol-A (BPA) elimination from aqueous solution. Fourier-transform infrared (FT-IR) and X-ray diffraction (XRD) were used to study the chemistry of the adsorbents. Batch sorption studies at different temperatures, contact time, adsorbent dosage, pH and varied Bisphenol-A concentrations were performed, while pseudo-first-order and pseudo-second-order kinetics models were deployed to investigate the kinetic data. Equilibrium parameters were computed using the Dubinin–Radushkevich, Freundlich, Temkin and Langmuir isotherms, while Box–Behnken design was used to optimize the adsorption factors. FT-IR report showed the existence of O–H, C=O, C–O and C=C stretches in both adsorbents and Fe–O in MACWS, while XRD revealed an amorphous morphology. BPA removal by ACWS and MACWS with correlation coefficient (R2) > 0.9 showed that the pseudo-first-order kinetic model was the most appropriate for explaining the kinetic data. Judging from the values of the maximum adsorption capacity (115.85 and 166.67 mg/g for ACWS and MACWS, respectively), it can be inferred that the Langmuir isotherm best describes the equilibrium results. Thermodynamic investigation showed the process of Bisphenol-A uptake to be spontaneous and endothermic with entropy change (∆So) values of 0.033 and 0.039 kJ/mol for ACWS and MACWS, respectively. The data obtained from the kinetics, isotherm and equilibrium studies revealed that ACWS and MACWS adsorbents were effective for the treatment of Bisphenol-A.

Keywords

• Walnut shell
• Activated carbon
• Surface response
• Bisphenol-A
• Wastewater