A new fabrication method for enhancing the yield of linear micromirror arrays assisted by temporary anchors

Abstract

Abstract As one of the most common spatial light modulators, linear micromirror arrays (MMAs) based on microelectromechanical system (MEMS) processes are currently utilized in many fields. However, two crucial challenges exist in the fabrication of such devices: the adhesion of silicon microstructures caused by anodic bonding and the destruction of the suspended silicon film due to residual stress. To solve these issues, an innovative processing method assisted by temporary anchors is presented. This approach effectively reduces the span of silicon microstructures and improves the Euler buckling limit of the silicon film. Importantly, these temporary anchors are strategically placed within the primary etching areas, enabling easy removal without additional processing steps. As a result, we successfully achieved wafer-level, high-yield manufacturing of linear MMAs with a filling factor as high as 95.1%. Demonstrating superior capabilities to those of original MMAs, our enhanced version boasts a total of 60 linear micromirror elements, each featuring a length-to-width ratio of 52.6, and the entire optical aperture measures 5 mm × 6 mm. The linear MMA exhibits an optical deflection angle of 20.4° at 110 Vdc while maintaining exceptional deflection flatness and uniformity. This study offers a viable approach for the design and fabrication of thin-film MEMS devices with high yields, and the proposed MMA is promising as a replacement for digital micromirror devices (DMDs, by TI Corp.) in fields such as spectral imaging and optical communication.