Energies (May 2021)
Study on Annular Pressure Buildup in Offshore Heavy Oil Thermal Recovery Wells Considering Dissolved Gas Contained in Annuli
Abstract
In the offshore industry, especially heavy oil thermal recovery wells, due to the great temperature difference between the low-temperature seawater and high-temperature heavy oil, it is easy to cause the temperature increase of annular fluid in the operation process which will result in the annular pressure buildup phenomenon (APB). The increase of annulus pressure may lead to the failure of the casing and wellbore integrity, which will seriously affect the normal production and lead to great economic loss. In order to study the formation of APB and provide a basis for the field operation design, a radial full-size physical experiment of APB was carried out in this work and an annular pressure prediction model in the presence of dissolved gas was proposed based on the experimental results. The verification and comparison analyses of the full-liquid model and the dissolved gas model were conducted with the experimental data. Furthermore, the sensitivity analysis of the influence of the dissolved gas volume fraction and casing deformation on APB was carried out. The results show that the prediction results calculated by the dissolved gas model are in good agreement with the experimental data and the prediction accuracy is higher than that of the full-liquid model. When the annular dissolved gas volume fraction is less than 0.1%, the full-liquid model can be used to simplify and approximate calculations. Ignoring casing deformation will produce prediction error in each annulus, which means this simplification should be used with extreme caution. This work provides a valuable experimental reference for the study of APB, as well as a novel model for APB prediction in the field.
Keywords