Scientific Reports (Jun 2021)

Inverse-designed ultra-compact high efficiency and low crosstalk optical interconnect based on waveguide crossing and wavelength demultiplexer

  • Yanhong Xu,
  • Jie Huang,
  • Lina Yang,
  • Hansi Ma,
  • Huan Yuan,
  • Tong Xie,
  • Junbo Yang,
  • Zhenrong Zhang

DOI
https://doi.org/10.1038/s41598-021-92038-w
Journal volume & issue
Vol. 11, no. 1
pp. 1 – 8

Abstract

Read online

Abstract In this paper, we use the inverse design method to design an optical interconnection system composed of wavelength demultiplexer and the same direction waveguide crossing on silicon-on-insulator (SOI) platform. A 2.4 μm × 3.6 μm wavelength demultiplexer with an input wavelength of 1.3–1.6 μm is designed. When the target wavelength of the device is 1.4 μm, the insertion loss of the output port is − 0.93 dB, and there is − 18.4 dB crosstalk, in TE0 mode. The insertion loss of the target wavelength of 1.6 μm in TE0 mode is − 0.88 dB, and the crosstalk is − 19.1 dB. Then, we designed a same direction waveguide crossing, the footprint is only 2.4 μm × 3.6 μm, the insertion loss of the wavelength 1.4 μm and 1.6 μm in TE0 mode is − 0.99 dB and − 1 dB, and the crosstalk is − 12.14 dB and − 14.34 dB, respectively. Finally, an optical interconnect structure composed of two devices is used, which can become the most basic component of the optical interconnect network. In TE0 mode, the insertion loss of the output wavelength of 1.4 μm at the output port is − 1.3 dB, and the crosstalk is − 29.36 dB. The insertion loss of the output wavelength of 1.6 μm is − 1.39 dB, and the crosstalk is − 38.99 dB.