IEEE Access (Jan 2021)
High Performance Flexible Structure Three-Level DC-DC Converter: A Candidate DC Interface for Microgrids With Distributed Energy Resources
Abstract
High-performance DC interfaces play a pivotal role in microgrids with distributed energy resources (DERs), which would significantly improve the utilization of DERs and the flexibility of the prosumers. For a candidate DC interface converter, how to maintain the performance over a wide operation range becomes the biggest challenge. This paper proposes a flexible structure soft-switching three-level (TL) dc-dc converter, which adds four high-speed MOSFETs and one low-speed electronic relay to achieve overall optimum performance over a wide range. Under high output or low input voltage conditions, the relay and the extra MOSFETs on the primary side are ON permanently. The proposed converter is a zero-voltage switching (ZVS) converter, which guarantees ZVS for all primary switches even under 0 load currents. Under low output or high input voltage conditions, the relay and the extra MOSFETs in the secondary side are OFF permanently. The proposed converter is a zero-voltage and zero-current switching (ZVZCS) converter, and two added MOSFETs provide ZVZCS operation not only for the main primary switches but also themselves over a wide range. Other advantages of the presented converter include reduced filter size, no primary side circulating currents, and reduced current stress of the clamping capacitor. Besides, the switching loss caused by the added power devices is low because of the full range of soft-switching operation and low on-state resistance of these devices. This paper discusses the circuit configuration, operation principle, soft switching characteristics, technical comparison, and experimental results from a 1-kW prototype prove the rightness of the presented converter.
Keywords