Investigation of Flame Evolution in Heavy Oil Boiler Bench Using High-Speed Planar Laser-Induced Fluorescence Imaging

Abstract

Over recent years, much attention has been paid to the performance evaluation of industrial-type burners. The ignition and stable combustion process are of great significance in assessing the quality of burner. The planar laser-induced fluorescence (PLIF) technique can be applied to heavy oil boilers, extending this technique to engineering applications. Considering the complex environment of the bench test, measures such as temperature control and moisture proofing are made to improve the possibility of detection using PLIF. In this paper, an experimental investigation of flame growth following ignition is reported. A wrinkled structure could be observed from the configuration of the ignition flame; its trajectory will be depicted. The results showed that the wrinkled structure developed downward, i.e., by deviation from the direction of the airflow. The displacement velocity of the flame was used to describe the combustion rate. Good agreement was obtained for the flame shapes of both forced ignition and autoignition. In addition, the center of combustion deviated from the center of boiler, possibly due to some irregularity in the burner’s assembly which was critical to the design of the combustion chamber.

Keywords

• PLIF technique
• heavy oil boiler
• oxy-fuel combustion
• performance evaluation
• forced ignition
• autoignition
• wrinkled structure
• displacement velocity