Effect of Ce on structural evolution and corrosion resistance of HRB500E rebar corrosion layer

Abstract

Abstract HRB500E rebar is a low-alloy high-strength steel with excellent mechanical properties and good plasticity but suffers from deficient corrosion resistance. This can be solved by adding trace elements, including rare earth elements. Herein, the corrosion-resistant behavior of rebar was evaluated by weightlessness testing and electrochemical measurements, and the effects of Ce on the structural evolution of the corrosion product layer were investigated by scanning electron microscopy (SEM), Electron Probe X-ray Micro-Analyzer (EPMA), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The results showed that adding Ce to the rebar improved the densification of the reinforcing surface corrosion products, as well as reduced the corrosion rate of the experimental rebar. Compared to C0 sample without Ce, the rebar sample containing 0.044 wt.% Ce displayed increased Ecorr by 0.051 V, decreased Icorr by 15.573 mA cm−2, enhanced Rc of the corrosion product layer by 112.71 Ω cm2, incremented α-FeOOH content in the corrosion product layer, and boosted ratio of α/γ* in the corrosion product layer by 10.11%. Furthermore, the oxide (CeO2) formed by Ce in the corrosion layer of the rebar bar surface existed in the rust layer, resulting in a stable corrosion product layer with improved blocking ability of the corrosive medium. Overall, the addition of Ce at certain ratios looks promising to produce HRB500E rebar with excellent corrosion resistance and extended service life under harsh conditions.

Keywords

• HRB500E rebar
• Rare earth
• Electrochemistry
• Corrosion products
• Corrosion resistance