Ti6Al4V-0.72H on the Establishment of Flow Behavior and the Analysis of Hot Processing Maps

Abstract

Significant columnar grains usually occur in the metallurgical microstructure of laser additive manufacturing, and plastic deformation introduced into additive manufacturing can significantly refine grain size. Due to the high deformation resistance and difficult deformation of titanium alloys, reducing the high-temperature deformation resistance of additive manufacturing titanium alloys is essential to facilitating the implementation of online rolling processes. High-temperature compression of titanium alloys was performed on a Gleeble-3800. It was found that the flow stress of the alloy decreased when the strain of the alloy decreased or the deformation temperature increased. The flow behavior of titanium alloys at high temperatures was investigated with the help of a Z-parameter flow model and multiple linear regression model. A positive correlation was found between the experimental and predicted values of the alloy under the multiple linear regression model, with a correlation coefficient of 0.98 and its error of 13.5%, which could better predict the flow stress values. In addition, hot processing maps were established, and the optimal deformation conditions were determined to provide some theoretical guidance for subsequent experiments.

Keywords

• laser melting deposition
• hydrogen addition
• Ti6Al4V
• flow behavior