An improved approach to estimating the infiltration characteristics in surface irrigation systems.

Abstract

The most common methods for estimating the infiltration function are measurements through a double-ring infiltrometer (DRI) and empirical models. Infiltration data always exhibit different kinds of scatter, which affect the accuracy of the estimated infiltration function. This study presents a new methodology to calibrate the infiltration function. The suggested approach is based on combining the DRI method with the changes in the measured soil water content. Furrow irrigation experiments were conducted to estimate the infiltration function using different methods and to investigate the effect of data scatter on the reliability of the estimated infiltration function. Furrow elevations were observed, and for each irrigation event advance times, recession times, and inflow rates were observed. The infiltration depths were measured as a function of the change in the soil water content before and after irrigation event. Infiltration parameters were estimated using DRI treatment, empirical model (Kostiakov model), and suggested approach. Measured and simulated infiltration depths using the described methods were compared. The results show that the infiltration depths estimated using a DRI were lower than the observed infiltration depths, while the infiltration depths estimated using the empirical model were higher than the observed infiltration depths. The results indicate that the infiltration function estimated using the recommended approach was more accurate and reasonable than the infiltration function estimated using the DRI, and empirical (Kostiakov model) methods. In addition, the proposed approach can reduce the required measurements during the irrigation event, and can also reduce the potential scatter in the estimated infiltration function that results from soil variability and measurement errors.