Development and application of a novel pre-drilling thermal probe in-situ testing equipment

Abstract

At present, the in-situ testing equipment used for measuring the thermophysical properties of rock and soil is scarce. Based on the working principle of the pressuremeter and ground heat exchanger, a pre-drilling thermal probe in-situ testing equipment is developed. This novel developed pre-drilling thermal probe in-situ testing equipment includes thermal probe, pressure control system, temperature control system, integrated conversion control device, and coaxial pressure pipe connection pipeline. A three-dimensional heat transfer model was established to simulate the heat transfer between the thermal probe and surrounding ground. Based on the principle of the temperature dissipation and numerical simulation, a calculation method for the thermal conductivity of rock and soil with pre-drilling thermal probe is proposed. Laboratory model tests of the sand under dry and saturated conditions were conducted. The deviation values for the thermal conductivities of sand under dry and saturated conditions measured by the designed pre-drilling thermal probe and thermal conductivity tester are 0.037 and 0.026 W/m·°C, respectively. Thus, the reliability of utilizing the new pre-drilling thermal probe testing equipment to measure the thermal conductivity of the soil is confirmed. The field test of utilizing this new pre-drilling thermal probe testing equipment to measure the thermal properties of the soil was performed. The results show that because the soil layers are in undisturbed state during the test process, the pre-drilling thermal probe testing equipment can truly reflect the inherent thermal properties of different soil layers.

Keywords

• Rock and soil
• Heat transfer
• Pre-drilling thermal probe testing equipment
• In-situ test