Study on the optimal design of specimens for stiffness coefficients identification of glass fiber-reinforced polymer composites by virtual fields method

Abstract

Glass fiber-reinforced polymer composites are important structural materials and are widely used in structure engineering. In this study, a new V-notch non-standard tensile specimen is proposed. All the in-plane stiffness coefficients of glass fiber-reinforced polymer composites could be obtained by the virtual fields method with only one uniaxial tensile test. First, the special virtual fields method for inversion of elastic constitutive parameters of orthotropic materials in the uniaxial tensile test was introduced. The optimization of the geometrical design of the specimen was conducted using finite element simulation experiments. Batch modeling calculation was conducted within the designed range of the geometric parameters of the specimen. The generated ideal strain field data were substituted into the virtual fields method to invert and identify the stiffness coefficients. The optimized geometry of the specimen was determined according to the objective function of minimum error. Through a tensile experiment on glass fiber composites, the influence of specimen deformation on the identification results was assessed, and the load level suitable for parameter identification was determined. Based on the results, it can be concluded that the inversion identification accuracy meets the requirements of engineering measurement.

Keywords

• Glass fiber-reinforced polymer composites
• Inversion of stiffness coefficients
• Tensile specimen with v-notch
• Virtual fields method