A Prototype Unit of a Distributed Sensor System for Ecological Monitoring

Abstract

Introduction. In this article, the basic principles of ecological monitoring were considered, and the possibilities of constructing sensor systems were analysed. It was proposed to use the NB-IoT low-energy telecommunication standard as a basic wireless protocol for ecological system development, which ensures effective communication of network devices. A prototype of the system was constructed, and algorithms for receiving and transmitting signals were simulated.Aim. To construct a prototype of a transceiver based on the NB-IoT standard and perform its simulation. To utilize digital twin in MatLab to create the proposed system.Materials and methods. The prototype was constructed using the Xilinx Zedboard evaluation board and transceiver on AD9361 chip, and the simulation was performed using the MatLab 2010 software package.Results. The results of the simulation in the channel with the additive white Gaussian noise (AWGN) were obtained, and the level of the detected synchronization signals of the NB-IoT standard was determined. The receiver and transmitter of the NB-IoT standard were implemented on the Xilinx Zedboard evaluation board. The timing simulation results show that the designed system can be tested in a real environment. The power consumption and resource utilization of the constructed wireless sensor network prototype unit were determined. Conclusion. The results obtained via the simulation process show that the designed prototype of the communication system works correctly, and the produced signal meets all the requirements of the NB-IoT standard. The results can be used for creating a domestic manufactured, specialized integrated chip for data units of ecological monitoring systems.

Keywords

• системы мониторинга окружающей среды
• сенсорные сети
• быстрое прототипирование
• плис
• интернет вещей
• nb-iot