Metals (Mar 2024)

Mechanical Properties and Fracture Toughness Prediction of Ductile Cast Iron under Thermomechanical Treatment

  • Mohammed Y. Abdellah,
  • Hamzah Alharthi,
  • Rami Alfattani,
  • Dhia K. Suker,
  • H. M. Abu El-Ainin,
  • Ahmed F. Mohamed,
  • Mohamed K. Hassan,
  • Ahmed H. Backar

DOI
https://doi.org/10.3390/met14030352
Journal volume & issue
Vol. 14, no. 3
p. 352

Abstract

Read online

Temperature has a great influence on the mechanical properties of ductile cast iron or nodular cast iron. A thermomechanical treatment was carried out at various elevated temperatures of 450 °C, 750 °C and 850 °C using a universal testing machine with a tub furnace. Specimens were held at these temperatures for 20 min to ensure a homogeneous temperature distribution along the entire length of the specimen, before a tensile load was applied. Specimens were deformed to various levels of uniform strain (0%, 25%, 50%, 75%, and 100%). These degrees of deformation were measured with a dial gauge attached to a movable cross plate. Three strain rates were used for each specimen and temperature: 1.8×10−4 s−1, 9×10−4 s−1 and 4.5×10−3 s−1. A simple analytical model was extracted based on the CT tensile test geometry and yield stress and a 0.2% offset strain to measure the fracture toughness (JIC). To validate the analytical model, an extended finite element method (XFEM) was implemented for specimens tested at different temperatures, with a strain rate of 1.8×10−4 s−1. The model was then extended to include the tested specimens at other strain rates. The results show that increasing strain rates and temperature, especially at 850 °C, increased the ductility of the cast iron and thus its formability. The largest percentage strains were 1 and 1.5 at a temperature of 750 °C and a strain rate of 1.8×10−4 s−1 and 9×10−4 s−1, respectively, and reached their maximum value of 1.7 and 2.2% at 850 °C and a strain rate of 9×10−4 s−1 and 4.5×10−3 s−1, respectively. In addition, the simple and fast analytical model is useful in selecting materials for determining the fracture toughness (JIC) at various elevated temperatures and different strain rates.

Keywords