Scientific Reports (Jul 2024)

Adsorption characteristics and applications of andesite in removing some pollutants from wastewater

  • Abdalla M. Khedr,
  • Nadia Elwakiel,
  • Sameh E. Halawia,
  • Ramadan Abdelghany Mansour

DOI
https://doi.org/10.1038/s41598-024-65043-y
Journal volume & issue
Vol. 14, no. 1
pp. 1 – 19

Abstract

Read online

Abstract Andesite was employed to effectively extract mercury(II) in an aqueous solution. After evaluating its characteristics, andesite was characterized by applying modern techniques such as BET and TGA methods. The study employed SEM and TEM measurements to analyze the variation in the surface shape and crystallinity of the metal due to adsorption. Using the EDX process, the chemical composition, weight, and atomic percentage of each element of andesite were determined. FTIR techniques were also used to confirm the TEM–EDX findings. Zeta potential was estimated. Cycles of regeneration and desorption have been examined. 99.03% was the highest uptake percentage. Adsorbent quantity (0.0025–0.05) g/L, contact time (5–60) min, pH (2–10), temperature (25–60) °C, and dose (0.0027, 0.0044, 0.0125, 0.0155, and 0.0399) mg/L all affect the amount of removal that increases with the increase in contact time, pH, dose, and temperature but drops as the metal ion concentration rises. The ideal values for contact time, pH, metal ion concentration, dose, and temperature were found to be, respectively, 30 min, 0.0155 mg/l, 0.02 g/l, and 40 °C. The calculation of thermodynamic parameters, including ΔH, ΔG, and ΔS, was imperative in establishing that the mechanism of heavy metal adsorption on andesite was endothermic, exhibiting a physical nature that escalated with temperature rise. The Freundlich adsorption equation's linear form is matched by the adsorption of mercury(II) on andesite; constant n was 1.85, 1.06, 1.1, and 1.1, whereas the Langmuir constant qm was found to be 1.85, 2.41, 3.54, and 2.28 mg/g at 25–60 °C. Furthermore, adsorption follows a pseudo-second-order rate constant of (3.08, 3.24, 3.24, and 13) g/mg/min under identical temperature conditions, as opposed to a first-order rate constant of 4, 3, 2.6, and 2. Hg2+, NH4 +, Cl−, Br−, NO3 −, SO4 2−, Na+, K+, H2S, and CH3SH were all extracted from wastewater by this application.

Keywords