Tehnika (Jan 2022)
Analysis of braking parameters in testing of brake wear and particles formation on inertial brake dynamometer
Abstract
In parallel with the significant reduction of the impact of vehicles on the environment, the development of modern propulsion systems that have less and less harmful impact, new pollutants are being identified on the vehicle. One of the such pollutants is the brakes, which wear out and lead to the formation of particles that are released into the air, i.e. generally into the environment. Investigation of the mechanism of particle formation during braking, and thus the brake wear is today becoming one of the important areas of research. The most common tests in this area are performed using initial brake dynamometers and pin-on-disc machines. An overview of the influence of some operation parameters (initial vehicle speed, braking pressure, and deceleration) that varies frequently during testing on an inertial brake dynamometer is performed in this paper. There are a number of tests and cycles that are applied during research, but they are not specifically prescribed for testing the particle formation during braking. The UNECE (United Nations Economic Commission for Europe) has included it in its plan and is in the development phase of introducing standardized cycles that will prescribe the braking cycle, the purpose of which will be to examine the formation of particles. This kind of review paper can be important for researchers who are engaged in this field, and the develop their own cycles or tests to examine the concentration or mass of particles formed during braking.
Keywords