Automatic Measurement in Metallography

Abstract

Quantitative analysis of the structure of metals and alloys is an important part of modern metal science. To obtain quantitative data and build dependencies, metallographic image processing programs are used, oriented both for scientific research and for use in industry. Programs capable of automatically performing metallographic analysis are of great interest to consumers. When advertising such programs, it is often claimed that they allow quantitative analysis of the structure with virtually no time. The purpose of this work was to determine the time spent on quantitative metallographic analysis in some image processing programs presented on the Belarusian market. Connected and unconnected metallographic objects were considered. It is shown that automatic quantitative analysis is possible for unconnected objects (powders, cast iron graphite). The time required is within a minute. For connected objects (structures of metals and alloys after metallographic etching), the time required to detect objects and obtain digital data is 10–40 min or more, depending on the complexity of the object, which is unacceptable for factory laboratories that analyze a large number of samples per shift. Therefore, it is recommended that potential users of metallographic image processing software always require a substantive demonstration of the automatic measurement capabilities of the proposed software.

Keywords

• image processing programs
• automatic measurements
• grain size