Integrated Plug High-Strength Geocell Reinforcement in Foundation Design for Square Footing

Abstract

This paper develops an analytical model to calculate the ultimate bearing capacity of the integrated plug high-strength geocell (IPGC)-reinforced foundation under a square footing. The high strength and stiffness of the geocell wall and the typical failure of the integrated plug-in joint tearing were considered. The ultimate bearing capacity of the IPGC-reinforced foundation was calculated in two separate parts. The ultimate bearing capacity of an unreinforced foundation was calculated using the modified Terzaghi equation. The increased bearing capacity of the IPGC was calculated as the function of the tearing force of the geocell wall, the height and the diameter of a geocell, the empirical static earth pressure coefficient, and the vertical additional stress coefficient under uniformly distributed rectangular loading. The results showed that the maximum error between the experimental and the theoretical results is less than 18%. The ultimate bearing capacity of IPGC-reinforced foundations decreases with larger geocell diameters. When the diameter of the geocell exceeds 1.8 times the foundation width, the confinement effect of IPGC becomes negligible. The findings of this study offer a robust analytical equation for predicting IPGC-reinforced foundations, along with valuable insights into the efficacy of IPGC reinforcement in enhancing foundation stability.

Keywords

• reinforced foundation
• high-strength geocell
• ultimate bearing capacity
• theoretical model
• 3D confinement