Journal of Materials Research and Technology (May 2023)
Microstructures and mechanical properties of ENIG/Sn-3.5Ag/ENIG joints formed by ultrasonic-assisted solder bonding
Abstract
The effects of temperature and ultrasonic-assisted time on the microstructures and mechanical properties of the electroless nickel-immersion gold (ENIG)/Sn-3.5Ag/ENIG sandwich structure in ultrasonic chip bonding were investigated. Ultrasonic-assisted solder bonding was performed for 0.5–4 s at 25, 150, and 250 °C. The bonding was successful under all conditions. At 25 °C, Au–Sn intermetallic compounds (IMCs) were formed at the upper interface, and AuSn4 was formed on Ni–Sn IMCs at the lower interface. As the bonding time increased, spalling of AuSn4 was increasingly observed at the upper interface. At 150 °C, a trend similar to that at 25 °C was observed, but as the time increased, the thickness of the joint decreased, Au–Sn IMCs at the upper interface disappeared, and thin Ni–Sn IMCs and Cu6Sn5 were formed. The results observed at 250 °C differed from those observed at 25 and 150 °C because ultrasonic-assisted solder bonding was performed with the solder in a molten state. Ni–Sn IMCs were formed at the upper and lower interfaces, residual Sn and Au–Sn IMCs were present inside, and the thickness of the joint was very small. At 250 °C, the shear strength was high regardless of the bonding time. Observations of the top views and cross-sections of the fracture surfaces showed that, at 25 and 150 °C, the fractures initially occurred at the lower interface but moved to the upper interface as the bonding time increased. At 250 °C, the fractures did not significantly change, regardless of the ultrasonic-assisted time.
