Alexandria Engineering Journal (Dec 2024)
Hydraulic analysis of advanced spillway systems in tailings dams under extreme weather conditions
Abstract
With the increasing frequency of extreme weather events, heavy rainfall and flooding pose significant pressure on the flood discharge systems of tailings dams. Simple discharge systems are insufficient to meet the flood discharge requirements of tailings dams, while complex discharge systems, with their greater flood discharge capacity, are gradually being promoted. Although complex discharge systems can increase the flood discharge capacity of tailings dams, the flow patterns within the discharge systems become more complex. As a new type of discharge system layout, existing research lacks systematic analysis, and its complex flow characteristics are not clear. This paper relies on the flood discharge system of a large tailings dam to carry out theoretical calculations and derivations of the hydraulic characteristics of the complex flood discharge system. Hydraulic characteristics are observed through hydraulic model tests and verified using numerical simulations. Based on these three methods, a basis for further research on the hydraulic characteristics of complex flood discharge systems is provided. The main results are as follows: (1) The formulas for calculating the discharge flow rate Q under different flow states in the tailings dam design manual are not applicable to complex discharge systems; (2) Formulas for calculating the discharge flow rate Q under different flow states in complex discharge systems are proposed; by comparing model test values and numerical simulation values, the accuracy of the formulas for calculating the discharge flow rate Q in complex discharge systems is verified; (3) If the traditional mode is used to calculate the discharge flow rate Q in complex discharge systems, it is recommended to take the reduction coefficient as 0.55–0.56, and the model test values should also be referred to during flow state transitions.
