Effect of Annealing Temperature on Microstructure and Properties of DH Steel and Optimization of Hole Expansion Property

Abstract

In this article, DH steel containing Nb and Nb-Cu above 1000 MPa was designed, and its phase transformation law was analyzed through thermal expansion tests. The influence of annealing temperature on the microstructure and properties of DH steel was studied using a continuous annealing simulation testing machine, SEM, and tensile testing machine. The results showed that under a continuous annealing process, the test steel is composed of ferrite, martensite, a small amount of bainite, and residual austenite. The tensile strength decreases with the increase in annealing temperature, Cu element is dissolved in the matrix which produces solid solution strengthening and results in an increase in the strength of Cu-bearing test steel. Finally, 1180 MPa grade DH steel with excellent comprehensive properties was obtained at an annealing temperature of 840 °C and an overaging temperature of 340 °C. The expansion performance of the experimental steel was studied and optimized. Under the step heating annealing process, the experimental steel is composed of tempered martensite, ferrite, and residual austenite, with smaller differences in hardness between different phases, lower average dislocation density, and better expansion performance. Cu-bearing DH steel achieved an excellent match of strength and plasticity of 1289 MPa × 19.8%, with the hole expansion rate of 21.9% and the loss rate of hole expansion rate of 10%.

Keywords

• dual-phase steel with high formability
• continuous annealing
• microstructure
• mechanical properties
• hole expanding performance