Nigerian Journal of Technological Development (Jun 2022)

Estimation of Losses and Efficiency of Double-stator Switched Flux Permanent Magnet Machines

  • C. C. Awah,
  • O. I. Okoro,
  • A. J. Onah,
  • G. C. Diyoke

Journal volume & issue
Vol. 19, no. 2

Abstract

Read online

Losses such as rotor iron and stator iron losses, magnet eddy current loss, as well as efficiency of a double stator permanent magnet machine having varying rotor pole numbers is estimated and presented in this study. This current investigation would be vital for electrical machine designers in quantifying the amount of losses in the various sections of a given double stator electric machine and as well provide better insight on resulting output efficiency of the machine. Time-stepping finite element analysis (TS-FEA) procedure is adopted in the calculations using ANSYS-MAXWELL simulation software. The compared machines having the same stator teeth/pole number (Ps) and different rotor pole (Pr) numbers are designated as: 6Ps/10Pr, 6Ps/11Pr, 6Ps/13Pr and 6Ps/14Pr. The predicted total loss values at rated current and operating base speed is 13.02 Watts, 13.13 Watts, 13.539 Watts, 13.537 Watts, from the 6Ps/10Pr, 6Ps/11Pr, 6Ps/13Pr and 6Ps/14Pr machine types, respectively. The corresponding efficiency of the machine types at rated working conditions is: 81.76%, 88.17%, 86.95% and 78.61%, respectively. The results show that magnitude of losses in a given machine would largely depend upon factors such as number of rotor poles and hence, the machine’s operating speed, electric loading and angular rotor position of the machine, etc. It is also found that the number of loss waveform cycles (Nc) in an electric revolution of the investigated machine would depend upon its stator and rotor arrangements. The most performing compared machine types are the ones that have 11- and 13-rotor pole numbers, while the least amount of efficiency is obtained from the machine type that has 14-rotor pole number. Above all, the 6Ps/10Pr and 6Ps/14Pr are characterized with high amount of pulsations or ripples and this is detrimental to the overall performance of the machines.

Keywords