Numerical simulation and experimental evaluation of flow ripple characteristics of Truninger pump

Abstract

Abstract Compared with involute internal gear pumps and gerotor pumps, lower flow ripple is the main advantage of Truninger pumps. Understanding the flow ripple mechanism and characteristics is of great significance to guide the design and manufacture of this type of pump. In this paper, the theoretical flow ripple and flow ripple rate expressions of the pump are derived based on the vector ray method, and the effects of variations of the design parameters of the pump on the theoretical flow ripple characteristics are studied. A three-dimensional numerical simulation model was established in Simerics-MP+ that accounted for the fluid properties and cavitation. All the geometric features, including unloading grooves, the oil distribution areas, the shapes of the suction and delivery passageways, and the axial and radial leakage gaps, were considered to achieve the highest accuracy in the prediction of flow ripple. Finally, a flow ripple test platform was built based on the secondary source method. The validity and accuracy of the model were verified by test results. The flow ripple characteristics under different working conditions were compared and analyzed. The following conclusions were obtained: (1) The smaller module, the larger addendum coefficient and the half angle of the tooth profile in the design process, the lower the pump speed during operation is beneficial to reduce the vibration and noise of this pump; (2) Flow ripple is the comprehensive result of the oil characteristics, internal leakage, and geometric characteristics through the comparisons of theoretical, simulation and experimental results; (3) The flow ripple amplitude and the ripple rate increased with the increase in the outlet pressure and the influence of the pump speed variations on the flow ripple characteristics is less than that of outlet pressure variations. The conclusions obtained in this paper will help designers understand the flow ripple mechanism, achieve low-noise pump designs, and optimize Truninger pumps.