IEEE Access (Jan 2022)
Analysis of Microgrid’s Operation Integrated to Renewable Energy and Electric Vehicles in View of Multiple Demand Response Programs
Abstract
A suitable energy management scheme and integrating renewable energy resources (RERs) can significantly increase energy efficiency and the stability of future grids operation. This work modeled a household energy management comprising a microgrid (MG) system and demand response programs (DRPs). Residential loads with price-based tariffs are introduced to reduce peak load demands and energy costs. For incorporating the uncertainties in RERs, their stochastic nature is modeled with a probabilistic method. This paper proposes a joint optimization approach for the optimal planning and operation of grid-connected residential, rural MG integrated into renewable energy and electric vehicles (EVs) in view of DRPs. The investigation focuses on energy saving of residential homes under different DRPs and RERs integration. The EVs are integrated into MG by including photovoltaic (PV), wind turbine (WT), fuel cell (FC), and diesel engines (DEs). A multi-objective optimization problem has been formulated to minimize the operating cost, pollutant treatment cost, and carbon emissions cost defined as C1, C2, and C3, respectively. The load demand has been rescheduled because of three DRPs, i.e., critical peak pricing (CPP), real-time electricity pricing (RTEP), and time of use (TOU). Further, the EV load has also been analyzed in autonomous and coordinated charging strategies. Using a judgement matrix, the proposed multi-objective problem is transformed into a single-objective problem. The results of an artificial bee colony (ABC) algorithm are compared with the particle swarm optimization (PSO) algorithm. The simulation analysis was accomplished by employing ABC and PSO in MATLAB. The mathematical model of MG was implemented, and the effects of DRPs based MG were investigated under different numbers of EVs and load data to reduce different costs. To analyze the impact of DRPs, the residential, rural MG is implemented for 50 homes with a peak load of 5 kW each and EV load with 80 EVs and 700 EVs, respectively. The simulation results with different test cases are formulated while analyzing the tradeoff between ABC and PSO algorithms. The simulation analysis shows that multiple DRPs, EVs, and RERs offered a substantial trade-off.
Keywords