Study on Filling Capacity of Optical Glass in a Novel Rapid Hot Embossing Process

Abstract

This paper aims to present a novel rapid hot embossing approach and to study filling capacity of optical glass in the hot embossing process. Firstly, a novel rapid hot embossing device is developed, which consists of a rapid heating module and a precision loading module. Particularly, the rapid heating module allows a maximum temperature of 800 °C and a heating rate of 300 °C/min, with decent temperature control accuracy and uniform temperature distribution. In hot embossing process, by incompletely filling the microhole of silicon carbide mold, a microlens would be formed on the surface of glass disc, and the filling capacity of glass is quantified by the maximum height of the microlens. The tailor-made hot embossing device was exploited to conduct a series of experiments for evaluating effects of process parameters on the filling capacity of N-BK7 glass. Experimental results indicate that the filling capacity of glass could be enhanced by increasing the embossing force, the embossing temperature, the soaking time but decreasing the annealing rate. Furthermore, compared to soaking time and annealing rate, embossing force and embossing temperature have more significant influence on the filling capacity of N-BK7 glass. Therefore, the novel rapid hot embossing is a practical and promising technology for fabricating microstructures on glass materials with high softening points.

Keywords

• hot embossing
• optical glass
• rapid heating
• filling capacity
• microlens