EPJ Web of Conferences (Jan 2020)

Depletion uncertainty analysis to the MYRRHA fuel assembly model

  • Hernandez Solis Augusto,
  • Stankovskiy Alexey,
  • Fiorito Luca,
  • Van den Eynde Gert

DOI
https://doi.org/10.1051/epjconf/202023912001
Journal volume & issue
Vol. 239
p. 12001

Abstract

Read online

In this work, the objective is to perform an uncertainty analysis on a MYRRHA -Rev.1.6 irradiation cycle study, being applied to a depletion scenario of a single fresh fuel assembly while assuming reflective boundary conditions. Such analysis is statistically based on the application of Wilk’s method of building tolerance limits after 100 depletion calculations were performed with the SERPENT2 code. Due to the computational burden of such type of simulations, this propagation of nuclear data covariances study (allowed by the fast computational performance of SERPENT2) was done at constant power, constant flux and, in a final exercise, at constant power with the addition of fission yield uncertainties (all of these cases employed ENDF/B-VII.1 data). It was observed that while depleting at constant power, the statistical variation of key fission products such as 148Nd is almost not present because of the normalization factor applied to the flux. In contrast, the irradiation at constant flux reveals dependence on burnup. Finally, the added fission yield uncertainties make clear the fact that they directly impact the degree of final uncertainty computed for fission products exemplified by 148Nd and 135Xe important for burnup estimation and reactor operation, respectively.