Agricultural Water Management (May 2024)
Actual evapotranspiration and energy balance estimation from vineyards using micro-meteorological data and machine learning modeling
Abstract
Actual evapotranspiration (ETa) can be commonly estimated using numerical models based on i) weather and plant-based parameters, ii) from remotely sensed data and energy balance algorithms, and lately, iii) through the development and implementation of machine learning (ML) modeling techniques. In this work, supervised ML models were developed from a vineyard located in Talca, Chile, (i) to estimate actual evapotranspiration (ETa) (Model 1; M1) using the micrometeorological approach [Eddy Covariance; EC; sensible (H), latent (LE), soil heat fluxes (G) and net radiation (Rn)] and data from an automatic meteorological station (AMS) in reference conditions as ground-truth (inputs); (ii) to estimate energy balance components (Model 2; M2) from AMS data (inputs) and EC energy balance data as targets; (iii) to estimate ETa from the EC’s measured ETa data as target and thermal time data (degree hours; DH) calculated from air temperature with a base of 5 °C increments from 5 – 45 °C as inputs (Model 3; M3) and iv) to estimate energy balance components (targets from EC) from the same inputs of Model 3 (Model 4; M4). Results showed that the developed ML models had high accuracy and performance with no signs of over or under-fitting with a high correlation (R) and slope (b) close to unity (M1; R=0.94; b=0.89; M2; R=0.97; b=0.93; M3; R=0.97; b=0.89–0.95; M4; R=0.98; b=0.97). Furthermore, models were directly deployed over another vineyard located 22 km West of the modeled vineyard at 60 m lower over the sea level with significant performances and R values (R = 0.64–0.87; b = 0.66–1.00 for M1 to M4, respectively). These models could be used for precision irrigation to increase water use efficiency and better control canopy vigor, balance fruit and vegetative components, and ultimately improve berry and wine quality traits.
