Manipulation of bubble collapse patterns near the wall of an adherent gas layer

Abstract

This paper aims to apply experimental methods to investigate the effect of the thickness of gas layers on the wall on the collapse direction of spark-induced bubbles. In the experiment, two high-speed cameras synchronously record the time evolution of the bubbles and the corresponding parameters such as the normalized collapse position and bubble collapse time. Experiments yielded results for individual bubbles over a range of normalized distances from 0 to 4.0 for different air layer thicknesses. Based on the morphology of the bubbles, the experimental jets were visualized into six different modes, namely, forward jet (FJ), merging jet (MJ), bidirectional jet (BJ), reversing jet (RJ), forward followed by reversing jet (FRJ), and non-directional jet (NDJ). The height of the air layer on the wall is affected by the fluctuation of the bubble volume and shows the opposite trend to the change of the bubble volume. The air film reaches its maximum height when the bubble collapses, which affects the final jet pattern. In addition, as the thickness of the air layer increases, the center of the bubble gradually migrates away from the wall. The different collapse modes and the migration of the bubble centers have positive significance for reducing cavitation erosion in engineering.

Keywords

• Bubble collapse
• Jet direction
• Cavitation erosion
• Gas layer