Defence Technology (Jun 2022)

Failure investigation on high velocity impact deformation of boron carbide (B4C) reinforced fiber metal laminates of titanium / glass fiber reinforced polymer

  • S. Suresh Kumar,
  • P.A. Shankar,
  • K. Lalith Kumar

Journal volume & issue
Vol. 18, no. 6
pp. 963 – 975

Abstract

Read online

High velocity ballistic impact deformation behaviour of Titanium/GFRP Fiber Metal Laminates (FML) has been explored. Both single and multiple projectiles impact conditions were considered. Ti/GFRP FML targets were fabricated with addition of 5% and 10% weight percentage of boron carbide (B4C) particles. Mechanical properties of Ti/GFRP FML targets were determined as per ASTM standards. High velocity ballistic experiments were conducted using Armour Piercing Projectile (APP) of diameter 7.62 mm and velocity ranging between 350 and 450 m/s. Depth of penetration of the projectile into the target was measured. The deformation behaviour of Ti/GFRP targets with and without the presence of ceramic powder (B4C) was investigated. “Ductile hole growth” failure mode was observed for pure GFRP target when subjected to single projectile impact whereas “plugging” failure mode was noted for Ti/GFRP targets. The presence of B4C (5% by weight) particles has significantly improved the ballistic resistance of the Ti/GFRP FML target by offering frictional resistance to the projectile penetration. Further addition (10% by weight) of B4C has reduced the ballistic performance due to agglomeration. None of the targets showed ‘brittle cracking’ or ‘fragmentation’ failures. When compared to the published results of Aluminium (Al 1100/GFRP and Al 6061/GFRP) FMLs, Ti/GFRP FML showed lesser DoP which increases its potential application to aerospace industry.

Keywords