Journal of Materials Research and Technology (Mar 2024)
Pozzolanic performance and characteristic analysis of binary blended cement incorporating ceramic polishing sludge
Abstract
The waste generated during ceramic polishing is typically disposed of in landfills rather than being recycled within the production facility, potentially causing environmental harm. This study aims to enhance industrial waste utilization and reduce CO2 emissions in the cement industry by investigating the feasibility of incorporating ceramic sludge from polishing processes into an innovative binary blended cement. Different binders were prepared with varying amounts of ceramic polishing sludge (CPS), ranging from 10% to 50%, and tested against the ASTM C595 standards. The results were compared with those of ordinary Portland cement (OPC). This approach involves evaluating the pozzolanic activity and conducting an advanced characterization assessment of CPS and binary blended ceramic polishing sludge cement (CPSC) paste. This study employed a combination of physical, mechanical, and chemical tests, including setting time, particle size distribution (PSD), Brunauer-Emmett-Teller (BET) specific surface area, compressive strength, X-ray diffraction (XRD), scanning electron microscopy (SEM), heat of hydration, and differential scanning calorimetry/thermogravimetric analysis (DSC/TGA). The results indicated that CPS can be used as a pozzolanic material to create innovative binders with properties comparable to those of OPC. The Strength Activity Index (SAI) values affirmed the pozzolanic properties of CPS, exceeding 75% for up to 40% CPS replacement. Incorporating CPS in the blended cement resulted in a slower rate of cement hydration, leading to prolonged setting times and reduced early strength development. Although the compressive strength decreased with increasing CPS content, it remained within the acceptable ASTM C595 limits with up to 50% replacement. Nevertheless, the optimal replacement level of OPC with CPS was determined to be 50%. Furthermore, CPS substitution reduced the dry density and improved the water absorption and apparent porosity, reflecting microstructural changes. The SEM images revealed that the blended CPSC had a lower apparent porosity than the pure OPC. The DSC/TGA analysis demonstrated that the blended cement had a lower calcium hydroxide content and higher silica than pure OPC.
