Journal of Rock Mechanics and Geotechnical Engineering (May 2023)
Unconfined compressive strength of MICP and EICP treated sands subjected to cycles of wetting-drying, freezing-thawing and elevated temperature: Experimental and EPR modelling
Abstract
Microbial-induced carbonate precipitation (MICP) and enzyme-induced carbonate precipitation (EICP) are two bio-cementation techniques, which are relatively new methods of ground improvement. While both techniques share some similarities, they can exhibit different overall behaviours due to the differences in urease enzyme sources and treatment methods. This paper presented 40 unconfined compressive strength (UCS) tests of MICP and EICP treated sand specimens with similar average calcium carbonate (CaCO3) content subjected to cycles of wetting-drying (WD), freezing-thawing (FT) and elevated temperature (fire resistance test – FR and thermogravimetric analysis – TG). The average CaCO3 content after a certain number of WD or FT cycles (ACn) and their corresponding UCS (qn) reduced while the mass loss increased. The EICP treated sand specimens appeared to exhibit a lower resistance to WD and FT cycles than MICP treated specimens possibly due to the presence of unbonded or loosely bonded CaCO3 within the soil matrix, which was subsequently removed during the wetting (during WD) or thawing (during FT) process. FR test and TG analysis showed a significant loss of mass and reduction in CaCO3 content with increased temperatures, possibly due to the thermal decomposition of CaCO3. A complete deterioration of the MICP and EICP treated sand specimens was observed for temperatures above 600 °C. The observed behaviours are complex and theoretical understanding is far behind to develop a constitutive model to predict qn. Therefore, a multi-objective evolutionary genetic algorithm (GA) that deals with pseudo-polynomial structures, known as evolutionary polynomial regression (EPR), was used to seek three choices from millions of polynomial models. The best EPR model produced an excellent prediction of qn with a minimum sum of squares error (SSE) of 2.392, mean squared error (MSE) of 0.075, root mean square error (RMSE) of 0.273 and a maximum coefficient of determination of 0.939.
