Numerical simulation of similarities between rotating detonation and high-frequency combustion instability under two mixing schemes

Abstract

This paper presents an experimental study on rotating detonations in a hollow combustor with the slit-orifice nozzle. The experimental results reveal that the propagation speed of detonation waves increases with the rise of mass flow rates and is greater than the Chapman–Jouguet detonation speed (VC−J). Furthermore, numerical simulations of rotating detonation in a non-premixed three-dimensional cylindrical combustor have been conducted based on a multispecies reacting code. The influence of two mixing schemes—that is, slit-orifice and coaxial injector—on detonation waves are studied to determine whether the characteristics of detonation waves tend toward high-frequency combustion instability due to changes in the mixing scheme. It is found that the slit-orifice scheme’s detonation speed, pressure, and temperature are significantly higher than those of the coaxial injector scheme. In particular, the detonation speed of the former reaches 124% of the VC−J, while that of the latter is only 80.5% of the theoretical value. The numerical results reveal that the low-speed detonation is caused by the deterioration of the hydrogen (H2)/air mixing conditions. Moreover, the flow-field structures of two mixing schemes were comparable, both containing transverse detonation waves, oblique shocks, contact surfaces, and wedge-shaped reactant regions. Furthermore, the Rayleigh index analysis showed that the unsteady heat release was in phase with the pressure fluctuations, amplifying the pressure. Therefore, it is suggested that high-frequency combustion instability may be a manifestation of rotating detonation waves under poor mixing conditions.