An Anisotropic Damage Model of Quasi-Brittle Materials and Its Application to the Fracture Process Simulation

Abstract

Accurate predictions of the failure behaviors of quasi-brittle materials are of practical significance to underground engineering. In this work, a novel anisotropic damage model is proposed based on continuous damage mechanics. The anisotropic damage model includes a two-parameter parabolic-type failure criterion, a stiffness degradation model that considers anisotropic damage, and damage evolution equations for tension and shear, respectively. The advantage of this model is that the degradation of elastic stiffness only occurs in the direction parallel to the failure surface for shear damage, avoiding the interpenetration of crack surfaces. In addition, the shear damage evolution equation is established based on the equivalent shear strain on the failure face. A cyclic iterative method based on the proposed anisotropic damage model was developed to numerically simulate the fracture process of quasi-brittle materials. The developed model and method are important because the ready-made finite element software is difficult to simulate the anisotropic damage of quasi-brittle materials. The proposed anisotropic damage model was tested against a conventional damage model and validated against two benchmark experiments: uniaxial and biaxial compression tests and Brazilian splitting tests. The results demonstrate that the proposed anisotropic damage model simulates the mesoscale damage mode, macroscale fracture modes, and strength characteristics more effectively and accurately than conventional damage models.

Keywords

• anisotropic
• damage model
• fracture process simulation
• quasi-brittle materials
• failure behaviors