Properties of Bio-oil and Bio-char from High-intensity Microwave-assisted Pyrolysis of Oil Palm Shell Waste

Abstract

Microwave-assisted pyrolysis was applied using four magnetrons to implement a high intensity at a power density of 0.3 × 107 W/m3 with 800 g specimen size. The 23 full factorial experimental design manipulated the factors temperature, mixture ratio, and pyrolysis time, seeking to maximize %yield at minimum cost of crude bio-oil. The optimum according to model fit had a temperature of 611 °C with a 70:30 sample mixture ratio of oil palm shell (OPS) to activated carbon (AC), and time 39.6 min for a yield of 15.3% and 8.48 Thai-Baht/cc cost. The coefficients of determination were R2 = 93.99% and 94.00% for the respective models. In the aqueous phase of crude bio-oil, acetic acid was the dominant chemical component at 55.2%, whereas phenol was dominant in the bio-oil phase at 44.2%, from 400 °C pyrolysis temperature. The assessed properties of bio-char were proximate composition, heating value, specific surface, and pore volume, and these were improved compared to the raw OPS. However, these properties must be improved further to match commercial-grade activated carbon.

Keywords

• microwave-assisted pyrolysis (map)
• oil palm shell (ops)
• crude bio-oil
• bio-char