Designing high-performance pervaporation membranes with hierarchical hydrophobic-hydrophilic coating layers

Abstract

In this study, a multi-layer pervaporation composite membrane was prepared by spray-coating a hydrophilic layer consisting of poly(allylamine hydrochloride) (PAH)/polyvinyl alcohol (PVA)/trimesic acid (BTA) onto a polyethersulfone (PES) porous substrate. The presence of amine groups facilitated the transport of water molecules, enabling the composite membrane to exhibit excellent water/ethanol separation properties. When a feed solution consisting of 90 ​wt% ethanol and 10 ​wt% water was dehydrated using the PV membrane at 70 ​°C, a flux of 1.46 ​kg ​m−2 ​h−1 with a water/ethanol separation factor of 3300 was realized. In addition, after coating a 267 ​nm silicone rubber layer on top of the membrane, the separation factor was further increased by 70.79 % to 5285, while the flux was slightly decreased by 12.33 % to 1.28 ​kg ​m−2 ​h−1. This was because the hydrophobic silicone rubber layer reduced the water swelling effect of the selective layer and hindered the permeation of ethanol-water coupling molecules, resulting in a reduction in the ethanol flux of the composite membrane and an improvement in the separation factor. This simple but effective method to improve dehydration properties was very useful for fabricating PV composite membranes.

Keywords

• Pervaporation
• Ethanol dehydration
• Polyallylamine hydrochloride
• Spray coating
• Silicone rubber protective layer