Radiation characterizations of two isotopic neutron sources merging in one irradiator for experimental applications in the laboratory

Abstract

Neutron sources are utilized for different aims, such as studying the material’s internal structure, investigating the materials’ crystal structures, and neutron therapy. Using more than one isotopic neutron source in some aims could be beneficial. Herein, a neutron irradiator consisting of two 241Am-9Be neutron sources has been designed. Radiation characterizations, including the neutron fluence and dose rate, were investigated. The Monte Carlo simulation code Monte Carlo N-particle transport code version 5 (MCNP5) was used to conduct all the required investigations to achieve an optimal design. Two factors were considered; the first was the dose rate due to both neutron and gamma radiations to meet radiation protection requirements; MCNP5 was used to determine the adequate thickness of the shielding material. The second parameter is the neutron fluence. Two irradiation sites have been proposed, one for fast neutron irradiation and the other for thermal neutron irradiation. By utilizing MCNP5, we have determined the radiation characterization at the two sites to be used as the irradiation sites. After the optimal design had been produced, the thermal and the epithermal neutron fluences inside the two irradiation sites were determined experimentally. The experimental results showed a perfect agreement with the simulation ones. The neutron irradiator designed from merged two isotopic neutron sources could be a benefit in the neutron radiation applications in the labs.

Keywords

• 241Am-9Be source
• Monte Carlo calculation
• Neutron flux
• Neutron activation