Effect of Ni Substitution on Thermoelectric Properties of Bulk <i>β</i>-Fe_1−xNi_xSi₂ (0 ≤ x ≤ 0.03)

Abstract

A thermoelectric generator, as a solid-state device, is considered a potential candidate for recovering waste heat directly as electrical energy without any moving parts. However, thermoelectric materials limit the application of thermoelectric devices due to their high costs. Therefore, in this work, we attempt to improve the thermoelectric properties of a low-cost material, iron silicide, by optimizing the Ni doping level. The influence of Ni substitution on the structure and electrical and thermoelectric characteristics of bulk β-FexNi1−xSi2 (0 ≤ x ≤ 0.03) prepared by the conventional arc-melting method is investigated. The thermoelectric properties are reported over the temperature range of 80–800 K. At high temperatures, the Seebeck coefficients of Ni-substituted materials are higher and more uniform than that of the pristine material as a result of the reduced bipolar effect. The electrical resistivity decreases with increasing x owing to the increases in metallic ε-phase and carrier density. The ε-phase increases with Ni substitution, and solid solution limits of Ni in β-FeSi2 can be lower than 1%. The highest power factor of 200 μWm−1K−2 at 600 K is obtained for x = 0.001, resulting in the enhanced ZT value of 0.019 at 600 K.

Keywords

• iron silicide
• bipolar effect
• Ni doping
• thermoelectric properties
• <i>ZT</i> values